News Archive
vna/J 3.1.6
Die ersten FT-991 sind da!
FT-991 KW/50/144/430 MHz Transceiver.
The Yaesu FT-991 Transceiver is capable of operating SSB, CW, AM, FM, Packet and System Fusion C4FMDigital. The legendary tradition of Yaesu design is a legacy of excellence established decades ago, providing quality, stability and durability.
The Yaesu FT-991 is designed for the most competitive operating situations, with a suite of new features to’enhance the experience. Whether you primarily operate at home, mobile or in the field, the FT-991 will provide outstanding fundamental performance and an inviting expansion into a full featured base station.
Radio Features
- 160 Meters through 70 Centimeters – SSB/CW/FM/C4FM Digital/AM/RTTY/PSK
- 100 Watts (2 Meter / 70 Centimeter: 50 Watts) of Solid Performance
- 3.5 inch TFT Full-Color Touch Panel Operation for Superior Operability and Visibility
- High Speed Spectrum Scope with ASC (Automatic Spectrum-Scope Control) built-in
- Roofing Filter 3 kHz and 15 kHz
- High Accuracy TCXO ±0.5 ppm and high resolution DDS and PLL local oscillator
- 32-bit High Speed Floating Point IF DSP
- IF WIDTH and IF SHIFT provides great QRM Rejection
- CONTOUR, DNR, IF Notch and APF (Audio Peak Filter, CW only)
- 160 – 6 Meters High Speed Automatic Antenna Tuner included
vna/J 3.1.5
vna/J 3.1.4
vna/J 3.1.2
vna/J 3.1.0
New YAESU FT-2DE
FT-2DE 2m/70cm Dual band Digital Handheld, 5W, 12.5kHz, C4FM/FM Dual band Digital
The FT2DE is also equipped with AMS (Automatic Mode Select) capability providing FM friendly digital communications that instantly recognizes either digital or FM analog communication and enables co-existance between the various communication modes. In addition, we have also included standard System Fusion features in the FT2DE to make it an ideal digital communication product for all Amateur Radio operators, such as (but not limited to): Snapshot with image data transmitting (requires MH-85A11U), Smart Navigation, Digital Group Monitor (GM) featuring position data and ID data transmitting during transmissions, and full support for the new and robust WiRES-X.
The advanced FT2DE is loaded with various new features such as: 700mW of clear loud audio, Built- in High Sensitivity 66ch GPS with antenna, 1200 bps / 9600 bps APRS® function, Dual watch (V/V, U/U/, V/U), Dual Monitor (C4FM Digital/C4FM Digital), GPS Logging/Recording capabilities, Water resistant (IPX5 Rating), micro SD Card Slot, and 2200mAh high capacity Li-Ion battery.
Product Description
Radio Features: – System Fusion Compatible
- C4FM Digital V/D Mode, Voice FR Mode, Data FR Mode and Conventional FM
- FM friendly digital operation with AMS (Automatic Mode Select)
- Easy Operation with 43 x 43 mm Large Touch Panel Display
- 700 mW Loud and Clear Voice Technology
- Snapshot Image Data Display with LCD display
- Built-in High Sensitivity 66ch GPS with antenna
- Smart Navigation
- Snapshot Function and Transmitting Image Data
- Digital Group Monitor
- 1200 bps / 9600 bps APRS® Function
- V/V, U/U, V/U Dual Watch and C4FM Digital/C4FM Digital Dual Monitor
- Wide Band Receive Capability 0.5 – 999MHz (A Band),180-580MHz (B Band)
- AF DUAL Monitor
- Equipped with microSD Card Slot
- GPS Logger records
Supplied Accessories:
- Antenna (YHA-72 )
- 7.2V 2200mAh Lithium Ion Battery Pack (SBR-14LI)
- USB Cable
- Belt Clip
- Operating Manual
- Warranty Card
* Battery Charger (PA-48) (*You can select either radio packed with/ without Battery Charger.)
Specifications:
Frequency Ranges:
A(Main) Band RX : 0.5 – 1.8 MHz (AM Broadcast)
1.8 – 30 MHz (SW Band) 30 – 76 MHz (50 MHz HAM)
76 – 108 MHz (FM Broadcast) 108 – 137 MHz (Air Band)
137 – 174 MHz (144 MHz HAM) 174 – 222 MHz (VHF Band)
222 – 420 MHz (GEN1) 420 – 470 MHz (430 MHz HAM)
470 – 774 MHz (UHF Band) 774 – 999.90 MHz (GEN2)
B(Sub) Band RX: 108 – 137 MHz (Air Band)
137 – 174 MHz (144 MHz HAM)
174 – 222 MHz (VHF Band)
222 – 420 MHz (GEN1)
420 – 470 MHz (430 MHz HAM)
470 – 580 MHz (UHF Band)
TX: 144 – 146 MHz, 430 – 440 MHz
Circuit Type: NFM/ AM:Double-Conversion Superheterodyne
FM /AM Radio: Direct-Conversion
Modulation Type: F1D, F2D, F3E, F7W
RF Power Output: 5 W (@ 7.4 V or EXT DC)
Channels: 1245
Waterproof Rating: IPX5
Case Size(W x H x D): 62 x 110 x 32.5 mm (w/ SBR-14LI, w/o Knob and Antenna) 62 x 110 x 27 mm (w/o SBR-14LI, Knob and Antenna)
Weight: 310 g With SBR-14LI and Antenna
*Aavailable in Spring 2015
New DXpatrol
DX-Patrol SDR Empfänger
Software Defined Radio mit grossem Frequenzbereich (100KHz to 2GHz)
 | |
 |
|
Der DX-Patrol ist ein Software Defined Radio (SDR) Empfänger mit einem sehr großen Frequenzbereich. Im Gegensatz zu den üblichen Billig-DVB-T Sticks verfügt dieser Empfänger über einen zusätzlichen Konverter für Kurzwelle. So wird ein weiter Frequenzbereich von 100 kHz bis 2000MHz möglich. Für den Betrieb mit dem HF-Konverter sind Bandfilter vorgesehen die die Großsignalfestigkeit des Empfängers verbessern, auch das haben die meisten Billig-SDRs nicht.
Ein weiteres Merkmal des DX-Patrol ist das der Frequenzbereich ohne Lücken abgedeckt wird. Durch die beiden unabhängigen Antennenanschlüsse (SMA) kann man die am besten geeigneten Antennen für den jeweiligen Empfangsbereich verwenden und ohne Umstecken die Bereiche wechseln. Die Umschaltung zwischen Kurzwelle und VHF erfolgt am DX-Patrol durch einen Kippschalter, der einen rauscharmen Pin-Dioden-Schalter ansteuert. Der jeweilige Betriebszustand (HF/VHF) wird durch eine mehrfarbige LED angezeigt. Die Abtastrate ist wie für den Chip typisch bis 3.2MS/s denkbar. Allerdings wird die tatsächlich erreichte Abtastrate durch die jeweilige Software festgelegt. Dadurch ergeben sich dann die sichtbaren Spektrumsbreiten von 96kHz bis ca. 1MHz und mehr.
Der Betrieb des DX-Patrol ist mit jeder Software möglich, die den RTL2832 Chip unterstützt. Das sind unter anderem:
- SDR# (Windows)
- HDSDR (Windows)
- sdr-radio.com (Windows)
- SDR Touch (Android)
- Gnu Radio (Linux)
- u.a.
Spezielle Programme wie rtl1090 oder dump1090 erlauben den Empfang der ADS/B-Baken von Flugzeugen. Damit und eienr geeigneten Antenne plus Kabel wird die Darstellung der aktuellen Fluglage am Standort möglich. Ausserdem kann man an weltweiten Netzwerken teilnehmen, die die Daten zum Beispiel für flightradar24.com bereitstellen. Andere Programme erlauben den Empfang von NOAA Wettersatelliten auf 137 MHz - die Möglichkeiten des DX-Patrol SDR EMpfängers sind endlos.
Die Installation des DX-Patrol SDRs ist einfach gehalten. Man verwendet am besten nicht die Windows-eigenen Treiber sondern den 'Zadig' Installer. Die meisten der o.g. Programme sind Freeware, es existieren dazu entsprechende Anleitungen im Internet. Eine eigene Software oder eigene Treiber werden mit dem DX-Patrol nicht mitgeliefert. Der Anschluß zum PC erfolgt mir einem USB-Kabel mit Mini-B Stecker, am PC wird ein USB2 Anschluß vorausgesetzt. Im Lieferumfang ist kein USB-Kabel enthalten.
New YAESU FT-991
FT-991 KW/50/144/430 MHz Transceiver. Verfügbar ab Januar/Februar 2015
The Yaesu FT-991 Transceiver is capable of operating SSB, CW, AM, FM, Packet and System Fusion C4FMDigital. The legendary tradition of Yaesu design is a legacy of excellence established decades ago, providing quality, stability and durability.
The Yaesu FT-991 is designed for the most competitive operating situations, with a suite of new features to’enhance the experience. Whether you primarily operate at home, mobile or in the field, the FT-991 will provide outstanding fundamental performance and an inviting expansion into a full featured base station.
Radio Features
- 160 Meters through 70 Centimeters – SSB/CW/FM/C4FM Digital/AM/RTTY/PSK
- 100 Watts (2 Meter / 70 Centimeter: 50 Watts) of Solid Performance
- 3.5 inch TFT Full-Color Touch Panel Operation for Superior Operability and Visibility
- High Speed Spectrum Scope with ASC (Automatic Spectrum-Scope Control) built-in
- Roofing Filter 3 kHz and 15 kHz
- High Accuracy TCXO ±0.5 ppm and high resolution DDS and PLL local oscillator
- 32-bit High Speed Floating Point IF DSP
- IF WIDTH and IF SHIFT provides great QRM Rejection
- CONTOUR, DNR, IF Notch and APF (Audio Peak Filter, CW only)
- 160 – 6 Meters High Speed Automatic Antenna Tuner included
New YAESU WIRES-X HRI-200
WIRES-X HRI-200 Verfügbar ab Oktober 2014
Radio Features
- WIRES-X supports both Analog and the new C4FM Digital radio communications mode
- WIRES-X allows communications between both C4FM digital stations and conventional FM stations via WIRES-X
- High quality voice communication is achieved by repeating C4FM digital data as it is via the Internet
- WIRES ID: Adopted a simple user ID system using alphanumeric characters
- Smart Access: WIRES-X automatically connects to nodes and rooms by utilizing the Smart Access function. (Digital node station only)
- Preset Serach: User can find local node station and receive their frequency setting data for automatic setup. (Digital node station only)
- Activity Monitor: IDs of active nodes and rooms can be searched from the C4FM transceiver via a local node. (Digital node station only)
- News Station: Stores and reads digital data such as text, images and audio data. (Digital node station only)
- WIRES-X provides everything that is needed to maintain a node or room for use by members only
- Easy setup: Opening ports on the router also can be accomplished by using uPnP standards on uPnP capable routers
- HRI-200 supports Analog FM mobile transceiver for Analog node station as well as Digital node station with FTM-400D
- DR-1X repeater support will be available in early 2015 with a DR-1X firmware update
- Supplied accessories include: USB Cable, Data Cable Mini-DIN 10pin-10pin (CT-174), Data Cable Mini-DIN 10pin-6pin (CT-175), WIRES-X setup disk (CD) and operating manual. 4.4" x 1.0" x 5.2" 12 oz. This device is USB bus powered (+5.0 VDC ±5% Neg. Ground 130 mA max , 30 mA TYP)